FemtoFAB is a turnkey femtosecond laser machine for industrial use. Configuration is selected and carefully tunned according to a specific laser micromachining application, including laser cutting, laser scribing, laser drilling and 3D laser milling with any desirable material (with >2,4 GW peak power). System is protected by Class 1 equivalent laser safety enclosure and is controlled through a single SCA engineer software window.

National innovation prize 2010.
An industrial-research laser machine for c-Si solar cells. Equipped with cutting edge duet – femtosecond UV laser and nanosecond IR laser, Sollas is a multi-tasking system, designed for industrial-research or up to 3 MW/a capacity pilot manufacturing lines.

Femtosecond laser micromachining system for science laboratories. Equipped with nanometer accuracy and resolution linear positioning stages, high performance galvanometer scanners and versatile micromachining software SCA, FemtoLAB becomes an entire laser laboratory on an optical table.
Tunable parameters:
- pulse duration (<200 fs – 10 ps);
- repetition rate (1 – 1000 kHz);
- average power (up to 12W);
- wavelengths (1030, 515, 343, 258 nm).

nSCULPTOR is a turnkey 3D laser lithography system for fabrication of nano structures. Operation of the system is based on multi photon polymerization (mPP) technique and works with many conventional photoresists available in the market. nSCULPTOR enables prototyping and production of various three-dimensional structures at nanometer accuracy and resolution.

A cost effective optical unit dedicated for wafer processing in laboratory environment. Very small footprint allows easy installation in existing laboratory facilities, by attaching it to an optical table. Integrated high-performance galvanometer scanners are able to process both – 5″ and 6″ wafers. Customized release of SCA student controls XY or XYZ beam scanning and laser parameters.

Yb:YAG micro laser produces high energy pulses at high repetition rates.

All-in-one solution for direct laser diode applications. Incorporates laser diode driver, aiming beam driver, temperature controller (fan/water pump control) as well as LCD and USB control interfaces. Microcontroller based cost effective CW/QCW laser diode driver for single-emitter laser diodes. Short current pulse rise/fall time durations in QCW mode.

Cost-effective solution designed for safe and reliable operation of single-emitter laser diodes and low power DPSS lasers. It incorporates laser diode driver and 2 TEC controllers as well as on-board user interface with 2-row LCD display and control buttons.

• 112 W total output power
• 15 A constant wave output
• up to 30 A pulsed output
• 125 mm x 110 mm x 30 mm size
• USB2 control interface
• 2 line LCD interface.

• 10 A laser diode current
• 4 A Peltier current
• 0.004 A setpoint resolution
• 1.5 to 3 V output voltage
• 0.001 V setpoint resolution
• +5 V DC input voltage
• 126.7mm x 51mm x 18.5mm size

Compact microstepper motor controller having USB and TTL control interfaces.
- Drives 2-phase stepper motors up to 20 W
- Rudged and lightweight design
- Power supply included

We offer our customers custom made connection cables for fast and easy connecting of our laser diode/TEC drivers to diode lasers.

Full functionality laser system automation software, dedicated for technically and ideologically unlimited 3D micromachining experiments. It is dedicated to control up to 5 Aerotech positioning stages, galvanometer scanners, laser parameters and many other devices.

SCA is featured in 2011 11 Laser Focus World magazine.

Developed by:

Micromachining software for simple 2D or 2.5D laser micromachining tasks. It supports beam scanning or up to 2 axes for sample positioning. SCA student is cost effective and very convenient tool for laser marking, laser dicing, laser cutting using either galvo-scanner based or linear positioning stage based laser micromachining setups.

SCA is featured in 2011 11 Laser Focus World magazine.

The third edition of motorized variable attenuators developed by Altechna. Controlled through USB as stand-alone or fully integrable with SCA laser automation software, Watt Pilot continuously variable motorized attenuator is readily used in automated laser systems.

Designed in WOP laboratories for holding wide variety of samples during micromachining. It proved to be very versatile and convenient in operation.

Radial (azimuthal) or Z polarization enables focusing of a laser beam to a smaller spot size and achieving the same machining properties in all directions. It is also applicable in optical tweezers and Raman spectroscopy. This special configuration lambda plate can either convert linear polarization to radial or azimuthal; or it can create an optical vortex of higher level (up to 4th and 5th) topological charge.